The T-Top Extender has been designed by boaters for boaters. We've designed and produced what we believe is the very best! We have a fair and honest return and warranty policy.  Read more about it here. 

Measure the width of your T-Top from the outermost edges.  Click here for more details on measuring.

Yes, the T-Top Extender was specifically designed for quick and easy removal. For short periods of non-use we suggest that you leave the mounts in place and only remove the fabric when your done. In fact, the aluminum poles slide back into the mount and can be locked in place and stored above your t-top for next use. However, you should be sure to spray the mounts with a corrosion inhibitor such as WD-40, Lanocote, or other product suitable for preventing metal corrosion in a marine environment. See "How it Works-Storing Your Extender" on the web site. For longer periods of non-use we suggest that you remove the mounting hardware, rinse with fresh water and coat with an anti-corrosive.

If exposed to salt spray use a corrosion inhibitor such as WD-40, Lanocote or another marine corrosion prevention product between the screws and the mount or take the hardware off of your boat and store. Wash the hardware down with fresh water after each use if exposed to salt spray and coat with a corrosion inhibitor such as WD-40, Lanocote, or other product suitable for preventing metal corrosion in a marine environment.

Yes, the fabric is made of high quality, stretch polyester and can be washed.

The T-top Extender is as wide as your T-Top.

The bow extenders project forward from seven feet on the centerline. The stern extender projects back five feet. However, you can adjust the extender to shorter lengths if desired.

The T-Top Extender is intended for use as a shade product and will provide minimal rain protection.

The T-top Extender is intended to be used while at anchor, drifting or slow trolling.

The T-Top Extender has been designed by boaters for boaters. We've designed and produced what we believe is the very best! We have a fair and honest return and warranty policy.  Read more about it here.

Measure the width of your T-Top from the outermost edges.  Click here for more details on measuring.

Yes, the T-Top Extender was specifically designed for quick and easy removal. For short periods of non-use we suggest that you leave the mounts in place and only remove the fabric when your done. In fact, the aluminum poles slide back into the mount and can be locked in place and stored above your t-top for next use. However, you should be sure to spray the mounts with a corrosion inhibitor such as WD-40, Lanocote, or other product suitable for preventing metal corrosion in a marine environment. See "How it Works-Storing Your Extender" on the web site. For longer periods of non-use we suggest that you remove the mounting hardware, rinse with fresh water and coat with an anti-corrosive.

If exposed to salt spray use a corrosion inhibitor such as WD-40, Lanocote or another marine corrosion prevention product between the screws and the mount or take the hardware off of your boat and store. Wash the hardware down with fresh water after each use if exposed to salt spray and coat with a corrosion inhibitor such as WD-40, Lanocote, or other product suitable for preventing metal corrosion in a marine environment.

Yes, the fabric is made of high quality, stretch polyester and can be washed.

The T-top Extender is as wide as your T-Top.

The bow extenders project forward from seven feet on the centerline. The stern extender projects back five feet. However, you can adjust the extender to shorter lengths if desired.

The T-Top Extender is intended for use as a shade product and will provide minimal rain protection.

The T-top Extender is intended to be used while at anchor, drifting or slow trolling.

The T-Top Extender has been designed by boaters for boaters. We've designed and produced what we believe is the very best! We have a fair and honest return and warranty policy.  Read more about it here. 

Measure the width of your T-Top from the outermost edges.  Click here for more details on measuring.

Yes, the T-Top Extender was specifically designed for quick and easy removal. For short periods of non-use we suggest that you leave the mounts in place and only remove the fabric when your done. In fact, the aluminum poles slide back into the mount and can be locked in place and stored above your t-top for next use. However, you should be sure to spray the mounts with a corrosion inhibitor such as WD-40, Lanocote, or other product suitable for preventing metal corrosion in a marine environment. See "How it Works-Storing Your Extender" on the web site. For longer periods of non-use we suggest that you remove the mounting hardware, rinse with fresh water and coat with an anti-corrosive.

If exposed to salt spray use a corrosion inhibitor such as WD-40, Lanocote or another marine corrosion prevention product between the screws and the mount or take the hardware off of your boat and store. Wash the hardware down with fresh water after each use if exposed to salt spray and coat with a corrosion inhibitor such as WD-40, Lanocote, or other product suitable for preventing metal corrosion in a marine environment.

Yes, the fabric is made of high quality, stretch polyester and can be washed.

The T-top Extender is as wide as your T-Top.

The bow extenders project forward from seven feet on the centerline. The stern extender projects back five feet. However, you can adjust the extender to shorter lengths if desired.

The T-Top Extender is intended for use as a shade product and will provide minimal rain protection.

The T-top Extender is intended to be used while at anchor, drifting or slow trolling.